| MessageKey
|
Message Text
|
Message Type
|
| SarkPCImsg12 |
Error occurred during DAHDI generation! |
Message
|
| Sarkactivetext |
Device definition is active |
Text
|
| Sarkadopttext |
Click to adopt this device |
Message text
|
| Sarkagentmsg1 |
There are no agents on the system. |
Message
|
| Sarkautomsg1 |
There are no Date Segments currently defined |
Message
|
| Sarkcallbackmsg1 |
There are no Authorized Call Back Numbers on the system. |
Message
|
| Sarkclustermsg1 |
There are no tenants defined to the system |
Message
|
| Sarkcosmsg1 |
There are no Classes of Service on the system. |
Message
|
| Sarkcustommsg1 |
There are no Custom Applications on the system. |
Message
|
| Sarkdeletetext |
Click to Delete |
|
| Sarkedittext |
Click to Edit |
Title
|
| Sarkglobalsh21 |
GENERAL SETTINGS |
Heading
|
| Sarkglobalsh213 |
Available Images |
Heading
|
| Sarkglobalsh214 |
Create/Restore the PBX image from backup |
Heading
|
| Sarkglobalsmsg7 |
Could not Mount USB Flash |
Message
|
| Sarkglobalsmsg8 |
Clicking the icon will load previous identity - are you sure? |
Message
|
| Sarkglobalsmsg9 |
New Identity fetched from flash - move csv files manually |
Message
|
| Sarkgreetingmsg1 |
Theer are no greetings recorded on the system |
Message
|
| Sarkinternalmsg1 |
There are no phones on the system |
Message Text
|
| Sarkinternalmsg2 |
There are no orphans on the system |
Message Text
|
| Sarkinternalmsg3 |
Wrong length Extension |
Message Text
|
| Sarkivrmsg1 |
There are no IVR menus on the system. |
Message
|
| Sarkmontext |
End-point is being monitored by SARK |
Text
|
| Sarkoffline |
End-point is Offline |
Title
|
| Sarkqueuemsg1 |
There are no queues on the system |
Message
|
| Sarkremotetext |
Remote UA is on-line |
Text
|
| Sarkspeedmsg3 |
There are no Call Groups or Aliases defined. |
Message
|
| Sarksystemh11 |
TDM/VoIP Softswitch - |
Header
|
| Sarksystemmsg1 |
Updates have been Committed |
System Message
|
| Sarksystemmsg5 |
Successfully Deleted |
Message
|
| Sarktinfotext |
Trunk is online and registered |
Text
|
| Sarktrunkh23 |
Add a Gateway Trunk |
Heading
|
| Sarktrunkh24 |
Add a Trunk |
Heading
|
| Sarktrunkmsg1 |
There are no lines on the system. |
Message
|
| Sarkwarntext |
End-point is on-line but not registered (this may be OK). |
Text
|
| abstimeout |
Call Timeout (seconds) |
Use this value to set an absolute time limit for outbound calls. The default is 3600 seconds (1 hour) and the maximum permitted value is 99999 seconds (about 28 hours). After the timer expires, the call will be put on-hook by the system.
|
| action |
Action |
Firewall Action - usually ACCEPT but see the shorewall documentation for other options
|
| active |
Active? |
Activate or de-activate this object
|
| agent |
Agent |
Agent number (allocated by SARK)
|
| agentact |
State |
Agent State (active/inactive)
|
| agentext |
Extension |
Agent extension (if logged in)
|
| agentname |
Name |
Agent Name
|
| agentpasswd |
Password |
The agents login password. It should be 4 digits.
|
| agentqueuename |
Queue |
Call Queue that this agent will receive calls from.
|
| agentstart |
Agent Start |
Agent number from which SARK will begin allocating agents.
|
| alert |
Diagnostic Alerts |
Set to none,email,sms or both
|
| Used to determine how you want to receive diagnostic alerts (requires a PTT SMS gateway to use sms. Many European PTTs provide these gateways but they are not so common in the USA at time of writing this note).
|
| alertinfo |
Alert-info string |
Use this field to specify distinctive ring data for the sip header. This is phone specific so you will need to read up on your phone type.
|
| allowhashxfer |
Allow hash transfer |
Set this to enabled if you want SARK to recognise a hash (pound) key press as a transfer request. Unless you are supporting POTS phones, it is recommended you leave this flag disabled.
|
| alternate |
Alternate Route to remote Host |
Specify an alternative if this route is unavailable. This is for desktop-to-desktop links using short dials. If the short dial link fails, you can specify a full-dial alternate. (e.g. IAX link to 5525 is down so dial 441924405525 over PSTN).
|
| appspan |
Span |
The Span of your custom app... Your app can be included into the inbound call path, the outbound call path, both inbound and outbound or neither. SARK will automatically generate the correct includes for you based upon the setting you choose here.
|
| astdlim |
Asterisk delimiter |
). If you are running Asterisk 1.6 then choose the comma(,).
|
| astfiledate |
create date |
Date the file was created
|
| astfilename |
Filename |
The filename
|
| attemptrestart |
Attempt Asterisk restart after failure? |
If set to YES, the SARK diagnostic routine will attempt a restart of Asterisk if it detects a failure. The parameter has no effect in HA systems. Default=NO.
|
| auth |
Auth |
Does this route require the user to enter a pin number in order to use it.
|
| authnum |
Authorized Number |
Telephone number you wish to authorize for callback.
|
| backchan |
Back Channel |
Channel to use for the Call back.
|
| beginclosed |
Beginning of Closed Period |
Select the start time of your closed segment.
|
| blindbusy |
Bounce busy destination |
Alternative destination if a bounce returns to a busy sender.
|
| bouncealert |
Alert-Info for Blind Xfer Bounce |
Use this field to specify distinctive ring data for the sip header. This is phone specific so you will need to read up on your phone type.
|
| callerid |
Caller ID |
Caller ID. You may be able to change this depending upon the sending device and the carrier rules.
|
| calleridname |
Caller Name |
This is what the phone will send in the callerid (name) variable. It is usually set to the user name or to some department function. Do not put spaces in this field because some phones do not handle spaces well.
|
| callgroup |
Number |
Name (extension number) of this call group
|
| callprogress |
Call Progress? |
Force an early ringback tone.
|
| callrecord1 |
Call Recording System Default |
Set the global recording preferences you want. This can be overriden at the individual call group or extension.
|
| callstate |
State |
Shows the device state at the time the screen was rendered
|
| camponqonoff |
Campon mini-queue ON/OFF |
Turn the camp-on feature ON and OFF
|
| camponqopt |
Campon mini-queue options |
Camp-on uses standard asterisk queues. You can set the queue parameters as you wish using this field.
|
| carrier |
Carrier |
This is either the SIP or IAX carrier name or the technology type (e.g. mISDN or Dahdi).
|
| carriertype |
Type |
Denotes the class of trunk (e.g. VOIP, PSTN etc.)
|
| cdialstring |
Custom Dial String |
Use only for custom devices
|
| cdr |
Log CDR to MySQL |
Set to yes if you want Sark/SAIL to log cdrs to MySQL (as well as the normal cdr-csv file). This will allow you to use the Areski Stats package to analyze your CDR records.
|
| cfbs |
CFBS |
Call forward on busy or no answer
|
| cfbscl |
CFBSCL |
Call forward on busy or no answer when closed
|
| cfbsop |
CFBSOP |
Call forward on busy or no answer when open
|
| cfim |
CFIM |
Call Forward Immediate
|
| cfimcl |
CFIMCL |
Call Forward Immediate when closed
|
| cfimop |
CFIMOP |
Call Forward Immediate when open
|
| cgroup |
Callgroup |
|
| classmask |
Class Dial Plan |
Enter the Class Dial Plan in standard Asterisk dial plan format. For example if you want a class that will handle all 5 digit and longer inbound numbers then you might enter _XXXX. Similarly, for a CLID class handler; if you wanted to create a class to handle all calls from UK mobiles (which always have numbers beginning 07) you might enter _07X.
|
| clidstart |
Caller ID |
Caller ID of the calling telephone.
|
| closeroute |
Closed |
The CLOSED\" inbound route. Route which will be used by the inbound route manager to process calls from this trunk when the system is \"Closed\" (i.e. in night mode).\"
|
| cluster |
Tenant |
This is the name of the Tenant which this object belongs to. If you specified no Tenant then SARK will use the default Tenant. Tenants are used to provide multi-tenant support within SARK.
|
| clusterstart |
Tenant support ON/OFF |
Turn ON/OFF multi tenant support
|
| compression |
CODEC |
[FIDELITY,THRUPUT,g729] Sark/SAIL will attempt to minimise CODEC transcoding using this value. If you choose Fidelity it will enforce g711(law) coding where it can. If you choose Thruput\" it will use g729 if it is available
|
| conftype |
Conference Type |
Choose from assisted or unassisted conferences.
|
| context |
Context Name |
The name of the context you want your custom app to run in. This must be system-wide unique.
|
| copy |
Copy |
Copy from an existing Device entry
|
| cosclosed |
Default Closed |
Defines whether this COS will be ON by default for closed hours when new extensions are created.
|
| cosdialplan |
Dialplan |
The dialplan pattern for this class-of-service. COS dialplans follow standard Asterisk dialplan conventions.
|
| cosname |
COS Name |
System-wide unique name for this class-of-service rule.
|
| cosopen |
Default Open |
Defines whether this COS will be ON by default for open hours when new extensions are created.
|
| cosstart |
Class Of Service ON/OFF |
Whether we will run COS or not. SARK Class of Service is very powerful but if you dont intend to use it then you can save a little cpu by turning it off.
|
| country |
Your Country Identifier |
Enter your country of operation.
|
| countrycode |
Country Code |
Set to the correct code for your country. This will control the tones which Asterisk generates for busy, ringback, congestion etc.
|
| datemonth |
Date |
Day date when this segment is active (asterisk * means any date).
|
| defaultclosed |
Defaultclosed |
Set this to YES if you want all new extensions to be created with this closed restriction
|
| defaultopen |
Defaultopen |
Set this to YES if you want all new extensions to be created with this open restriction
|
| desc |
Display name |
The username which SARK will set in either sip.conf or iax.conf for this end-point.
|
| description |
Description |
Freeform description string
|
| device |
Device |
This is the device type from SARKs IP Device database. It is used to provide the provisioning template.
|
| devicerec |
RecOpts |
Recording options for this object.
|
| dhcp |
DHCP_LAN |
Default YES; set this to NO if you want to set your own IP address
|
| dialplan |
Dialplan |
Route dialplan. The dialplan consists of the set of numbers and number patterns that this route will be sensitive to. (e.g. _0XXX. 100 _XXXXX) Arguments are separated by whitespace.
|
| didend |
DiD End |
End DiD (DDI) for this group (its perfectly fine to allocate only a single number).
|
| didstart |
DiD Start |
Beginning DiD (DDI) for this group (its perfectly fine to allocate only a single number).
|
| disapass |
DISA Password |
4 digit DISA password. Set this ONLY if you intend this trunk to be dedicated to DISA.
|
| displayname |
Legend |
String which will appear alongside the target object (or inside a widget) whenever it is displayed by SARK.
|
| dns |
DNS_LAN |
Set this to a valid value for your network
|
| dvrvmail |
Deliver Vmail to |
Number of the voice mailbox you wish to have voicemail delivered to.
|
| edomain |
External IP Address |
This field should usually only be filled out if you are running server-only behind a NATed firewall. It forces Asterisk to include the correct return IP address in outbound packets. Without it, Asterisk will use the local server IP address and effectively spoof\" itself.\"
|
| emailalert |
Email Alert Addresses |
Administrator email address
|
| emergency |
EMERGENCY |
Use this field to set your Emergency number (e.g. 911, 999, 112). This is used by Class of Service and becomes part of the always-available\" set of dialable numbers.\"
|
| endclosed |
End of Closed Period |
Select the end time of your closed segment.
|
| ext |
Extension |
Extension Number
|
| extalert |
Alert-info string |
Alert-info alters the SIP header sent to the device. It is usually used to send a request to play a distinctive ring-tone. The actual contect of the header varies from device to device.
|
| externalip |
Registration URI for remote phones |
Only applies to remote phones that you wish to provision from the SARK http provisioning server. This will be the remote (i.e. SARK) URI.
|
| extlen |
Extension Length |
SARK can have extension numbers of 3 or 4 digits. However, you can only change the length when there are no extensions defined to the system (i.e. at system inception).
|
| fax |
Autosense FAX Extension |
Endpoint to send Autosensed faxes to.
|
| faxdetect |
FAX Detect Delay |
How long to delay an inbound analogue call on a shared voice/fax line while we wait for Asterisk to decide if it has a fax or not.
|
| faxonoff |
Fax detect |
|
| filesize |
Size |
Filesize
|
| filetype |
type |
File type
|
| foppass |
4-digit Password for FOP Ops |
Self explanatory
|
| fwdest |
Dest |
Packet Destination - usually $FW (meaning inbound through the firewall)
|
| fwdestports |
DEST Ports |
Destination ports - a comma separated list of the port(s) you want to open; e.g. 5060,4569. For a port-range use a colon; 10000:20000
|
| fwproto |
PROTO |
Protocol(tcp,udp)
|
| fwsource |
Source |
Packet Source - usually either; net if you want to open a port completely (not recommended) or net:ipaddr(/cidr) if you want to open an ip or an ip range
|
| gatewayip |
GATEWAY_LAN |
Set this to a valid value for your network
|
| greeting |
Greeting Number |
Greeting number that this IVR uses.
|
| greetingnum |
Number |
The 4-digit greeting number
|
| groupstring |
Target Numbers |
The extensions in this callgroup. It can consist of extensions, call groups or external numbers separated by whitespace, e.g. 553 554 924018076
|
| grouptype |
Type |
The group type; ring, hunt etc...
|
| haautofailback |
HA Auto-Failback |
Turn auto failback on/off in the HA environment.
|
| haclusterip |
HA IP Address |
The HA virtual IP address
|
| haprinode |
HA Primary Node (uname -n) |
HA primary node name (given by uname -r)
|
| hasecnode |
HA Failover Node (uname -n) |
HA secondary node name (given by uname -r)
|
| hasynch |
HA Synch Mode |
HA synch mode lazy or loose. Loose means no synch.
|
| hausecluster |
Provision with Cluster IP? |
Generate provisioning files using the Cluster virtual IP rather than the node ip.
|
| header |
Asterisk Filename |
Name of the Asterisk control file for this header
|
| headlocation |
L/R |
Local or remote. Denotes whether the phone will run inside or outside the local firewall. If it is outside then SARK will use symmetrical RTP.
|
| host |
URI/IP address |
Enter the URI or the IP address of the target host.
|
| includetenants |
Tenants to Include |
This is a list of tenants (separated by whitespace) that extensions within this tenant will be allowed to dial using their regular three, or four digit extension numbers. By default, tenants can not dial one anothers phones in this way.
|
| inprefix |
Add CLI Prefix |
Allows you to add a CLI prefix. This is because many carriers do not send the NDD character (usually zero). This allows you to add it back.
|
| internal_fieldname |
Name |
The internal name which SARK uses to track this object
|
| intringdelay |
Default Ring Time(seconds) |
How long we will ring an internal phone before taking some outcome (usually voicemail).
|
| ipaddr |
IP Address |
The IP Address of the end-point.
|
| ivrname |
IVR Name |
IVR keyfield
|
| key1 |
\" |
Caller presses 1
|
| keytime |
Timeout Action |
What happens if caller presses no key
|
| latency |
Latency |
The latency of the end-point (i.e. the time taken for Asterisk to receive a response to an IP request).
|
| lclvoipmax |
Max LOCAL VOIP Calls |
Maximum local VoIP calls we will allow (this does not include extension to extension calls) but does include Sibling calls over locally connected PBXs).
|
| line |
Line |
Usually the Subscriber number the carrier has allocated to you. However it may also be a DiD(or DDI) number and sometimes the account name or number (in the case of some VOIP trunks).
|
| localIP |
Local IP |
Local subnet IP address
|
| localhost |
Local Host Name |
This is the local hostname - i.e somehost
|
| location |
Local/Remote |
Local or remote. Denotes whether the phone will run inside or outside the local firewall. If it is outside then SARK will use symmetrical RTP.
|
| logopts |
Logging Options |
Logging options native usbstick ramdisk. This should be left to deafult unless you are running a diskless PBX. setting this value incorrectly can lead to serious data loss
|
| lterm |
Late Termination |
If you set this value to YES, SARK will attempt to terminate inbound calls as late as it can in the switching process (i.e. when the target extension goes off hook). This is not always possible, or desireable and it can sometimes cause loss of ringback tone during complex switching operations such as internal/external call forking.
|
| macaddr |
MAC address |
The MAC address of the end-point. The MAC address is used by SARKs autoprovisioning routines.
|
| match |
Line Pre-select |
2 digit pre-select code (must be systemwide unique)
|
| misdnrun |
mISDN Driver |
Enable or disable the mISDN drivers from being loaded at system start-up.
|
| moh |
MOH instead of Ringtone |
Play Music-on-Hold rather than the more usual ringback tone to the caller.
|
| monitor |
Monitor this resource |
Set this to YES if you want the diagnostic routines to watch this resource.
|
| month |
Month |
Month Date when this segment is active (asterisk * means any month).
|
| mtime |
Multitimer |
Enable or disable the MTIME server. The MTIME server can save significant CPU if you have defined multiple timers in the automation panel on your system.
|
| netmask |
NETMASK_LAN |
Set this to the correct value for your subnet
|
| new |
New |
Button Text
|
| nrdigits |
Auto create alias digits |
Used to set the number of auto-create digits for number aliasing. This feature was useful before SARK supported both 3 and 4 digit extensions.
|
| obeydnd |
Obey DND? |
If set to YES dont ring phones that are in DND
|
| openfirewall |
Create Firewall Rule? |
If you specify YES then SARK will cretae a firewall rule for this url
|
| openroute |
Open |
The OPEN\" inbound route. Route which will be used by the inbound route manager to process calls from this trunk when the system is \"Open\".\"
|
| operator |
System Operator(default 0) |
The system operator. The key press you wish to use to contact the operator (default is zero).
|
| orideclosed |
Override |
Set this to YES if you want to force ALL extensions to have closed restriction
|
| orideopen |
Override |
Set this to YES if you want to force ALL extensions to have this open restriction
|
| outcome |
Outcome |
Where the call will be delivered if the call group fails to terminate the call.
|
| password |
Password |
The password for this IP Carrier account, called the secret\" in Asterisk sip.conf amd iax.conf.\"
|
| path1 |
Path 1 |
You can specify up to 4 paths (1 primary and up to 3 failover) in descending order of priority.
|
| path2 |
Path 2 |
You can specify up to 4 paths (1 primary and up to 3 failover) in descending order of priority.
|
| path3 |
Path 3 |
You can specify up to 4 paths (1 primary and up to 3 failover) in descending order of priority.
|
| path4 |
Path 4 |
You can specify up to 4 paths (1 primary and up to 3 failover) in descending order of priority.
|
| peername |
Asterisk peer |
This is the Asterisk sip.conf or iax.conf [peer] label which appears in square brackets above the peer cadenza. By default, SARK allocates a unique name to each peer but you can override it if you wish.
|
| pgroup |
Pickup Group |
|
| playbeep |
Play tone on Failover |
If set to YES a beep tone will be played whenever the system fails over a trunk call to a secondary provider. If set to NO, no tone will be played.
|
| playbusy |
Play tone on Busy |
If set to YES the PBX will come off-hook and play a busy tone, if set to NO the PBX will stay on-hook and play a busy message, if set to SIGNAL a BUSY signal will be sent to the ua.
|
| playcongested |
Play tone on Congested |
If set to YES the PBX will come off-hook and play a congestion tone, if set to NO the PBX will stay on-hook and play a congestion message, if set to SIGNAL a CONGESTION signal will be sent to the ua.
|
| playsound |
Play |
|
| port |
Port |
The port which this end-point is using to receive SIP packets.
|
| postdial |
Dial String Lead-out |
Used to construct the trailing part of the dial for this technology.
|
| predial |
Dial String Lead-in |
Used to construct the beginning part of the dial for this technology. For example, to use misdn TE p2p group dial you might specify mISDN/g:TEPP (see the mISDN setup guides at http://www.misdn.org).
|
| prefix |
Dial Prefix |
Use this if you need to have SARK dial a line-seize digit or some other pre-dial string during call back to an authorized number.
|
| preselect |
Seize |
Two digit Seize\" code. By prepending your call with the seize code you can override the normal call-routing and force a call to use this channel.\"
|
| privileged |
Priv |
Denotes whether this trunk is running in privileged mode or unprivileged mode. You can generally leave this to default unless you are consolidating T1/E1 circuits or handshaking with legacy equipment.
|
| provisioning |
Provisioning |
Header
|
| proxy |
Dynamic Proxy Enable |
Enables/disables SARKs dynamic proxy feature (see extensions panel status field).
|
| proxyignore |
Proxy Ignore List |
Some applications can be disrupted by the Dynamic Proxy processor. By placing their relative urls in this list, they will be specifically bypassed by the proxy processor.
|
| queueactagents |
Active Agents |
Number of active agents
|
| queuename |
Queue |
System wide unique queue name
|
| queueoptions |
Options |
Asterisk Queue options
|
| recqdither |
Queue Search Dither |
How far SARK will tolerate a time slip on a potential queuelog match. Expressed in seconds.
|
| recqitdelay |
Recording Daemon sleep time |
Daemon sleep time in seconds
|
| recqsearchlim |
Queue search limit |
How far SARK will read backwards up the queuelog looking to match a queue entry with an extension.
|
| register |
Registration String |
Used to provide a registration string if your carrier requires it
|
| remotenum |
DiD Number |
The subscriber number which will be presented to us by this trunk (technically, the Dialled Number ID, or DNID).
|
| rev |
Version |
SAIL rpm Version number
|
| ringdelay |
Ring Time (seconds) |
The number of seconds that we will ring the end-point before taking an outcome.
|
| route |
Route |
Route name - must be system-wide unique.
|
| routedesc |
Description |
Free form description
|
| rule |
Extension Number |
Extension Number. This is the system internal extension number. It can be 3 or 4 digits in length and it is set in globals(EXTLEN). SARK will set this value to the first unused extension number it can find, however you can override this if you wish.
|
| runfop |
Flash Operator Panel |
Enables/disables the FOP server. The FOP server is quite heavy on resource and it can cause big CPU spikes on a small system. Disable it to save CPU.
|
| s-peername |
Sibling or Trunk name |
For Siblings enter the linux hostname of the Sibling machine. For SIP-to-SIP type links enter the SIP peername.
|
| sarkPCImsg1 |
Error occurred during DAHDI generation. |
Message
|
| searchpath |
DNS Search Path |
The serach path is optional. If you wish to use it then set it to the correct value for your network (see man resolv.conf)
|
| sipiaxpeer |
Sip Peer entry |
|
| sipiaxstart |
Extension Start Number |
Extension number from which SARK will begin allocating extensions. Set extension length (EXTLEN in Globals) before you set this value.
|
| sipiaxuser |
SIP user entry |
|
| sipiaxusername |
Asterisk User |
This is the Asterisk sip.conf or iax.conf type=user label which appears in square brackets above the user cadenza
|
| sipmulticast |
PnP Provisioning? |
Enable this to provide multicast support for provisioning
this is used by phones from manufacturers such as Snom, Yealink and GIgaset
|
| skin |
Skin |
Sets the CSS for from the ones available in the drop down.
|
| smartlink |
Smartlink |
If set to yes, then SARK will attempt to match the last digits of the DiD with an extension number. If it finds a match it will automatically create a routing for the DiD to the extension.
|
| smsalert |
SMS Alert Numbers |
One or more numbers which will receive sms alerts in the event of a diagnostic alert.
|
| smsc |
SMSC Pathway |
Pathway to your carriers SMS hub (if they have one). This is specified as a formal asterisk channel name. As an example, the BT sms hub might be specified as follows...
|
| Dahdi/2/17094009
|
| source |
Source |
Source of the tooltip help (either Core (from the SARK tt DB) or User (from the user tt DB).
|
| spypass |
4-digit Password for Agent Spy |
Password used to validate spy requests.
|
| strunk |
Analogue inbound trunk |
Used to route inbound analogue calls
|
| subnet1 |
allow subnet (CIDR) |
A subnet in CIDR format from which you want to accept packets for this trunk
|
| subnet2 |
allow subnet (CIDR) |
A subnet in CIDR format from which you want to accept packets for this trunk
|
| supemail |
Supervisor Email |
Supervisor email address
|
| swoclip |
Switch on CLIP |
|
| sysop |
Operator Real Extension |
The operator endpoint. This is used by SARK as the endpoint of last resort so it is important that you point this at a real endpoint.
|
| syspass |
4-digit Password for KEY Ops |
Password used for privileged key operations (such as recording a greeting or putting the system into night mode).
|
| tag |
Alpha Tag |
Alpha tagging allows you to send a short character string to the phone. Most phones will display this tag\" when they receive it.\"
|
| technology |
Technology |
The Asterisk technology\" type (e.g. SIP
|
| tenantname |
Tenant |
The name of the Tenant. It should be system-wide unique.
|
| tenantoperator |
Operator |
The extension which will serve as the operator for this Tenant.
|
| tftp |
TFTP Server |
Enable or disable the tftp server. This can save memory in a small system if you are not using provisioning
|
| timespan |
Time Span |
Time when this segment is active (asterisk * means any time).
|
| transform |
Transformation mask |
Used to transform numbers using value comparisons and proceeding left to right... xx:xx xx:xx. Nulls in the left operand result in addition. Nulls in the right operand result in suppression.
|
| trunkname |
Name |
This is a name you can give to the trunk to help identify it.
|
| username |
Username |
The username for this IP Carrier account
|
| version |
Version |
THis is the SAIL version number. You may need this when dealing with Tech Support.
|
| vmailfwd |
User to receive email notifications |
Set this to the email address of the user if you want Asterisk to send voicemails as encapsulated attachments in an e-mail. This is often called unified messaging.
|
| voiceinstr |
Voicemail Instructions |
Setting this value to YES will cause voicemail to play the long instruction message. Setting it to NO plays the short version.
|
| voipmax |
Max Outbound VOIP calls |
Maximum number of concurrent VOIP outbound calls the system will allow before failing over to other pathways. This number should be set well below the bandwidth threshold of your Internet circuit.
|
| vringdelay |
Induced VoIP Ring Delay |
Allows you place an artificial ring-back tone delay onto a VOIP circuit. Voip circuits do not naturally ring\". This feature will generate a ring-back tone for the number of seconds specified. Usually
|
| weekday |
Day |
Day of the week when this segment is active (asterisk * means any day).
|
| xmpp |
XMPP |
Enable/Disable XMPP
|
| xmppserv |
XMPP server |
XMPP server URI
|
| ztp |
Zero Touch Provisioning? |
Enable this to provide Zero Touch Provisioning
You must also have PnP Provisioning enabled with this option
|
|
|
