Debian DAHDI
Install
There isn't a great deal of documentation on how to install Digium's DAHDI component onto Debian but it isn't hard so here's a little howto.
The correct "Debian way" to install driver modules uses the module assistant. What it will do is drag the source code from the libraries, compile it and then build an installable deb on-the-fly. It should work on any Debian Wheezy image.
This assumes you have already installed SAIL using the guide HERE (this means that all of the correct Asterisk stuff will already be installed).
apt-get install dahdi-source m-a a-i dahdi
This will chug along for a while. When it finishes, you will have a little further work to do. For some reason, the install puts DAHDI into a strange group ("dialout") in the udev rules.
cat /lib/udev/rules.d/60-dahdi-linux.rules SUBSYSTEM=="dahdi", GROUP="dialout", MODE="0660"
Change it to GROUP="asterisk" and reboot
sed -i 's/GROUP="dialout"/GROUP="asterisk"/' /lib/udev/rules.d/60-dahdi-linux.rules reboot
Reboot the box
Tailor/fix
There is a bug in one of the DAHDI Perl routines which will cause problems if you don't fix it. There is a published patch from Digium but you'll need to fix it manually because the patch won't verify on Debian (Span.PM is in a different place in EL5/6). Here is the Digium patch
diff --git a/xpp/perl_modules/Dahdi/Span.pm b/xpp/perl_modules/Dahdi/Span.pm
index cf38c80..ea08961 100644
--- a/xpp/perl_modules/Dahdi/Span.pm
+++ b/xpp/perl_modules/Dahdi/Span.pm
@@ -230,6 +230,11 @@ sub new($$) {
last;
}
}
+ if (($self->is_soft_term_type == 0) and ($self->termtype eq "UNKNOWN")) {
+
+ }
+
+
+
($self->{NAME}, $self->{DESCRIPTION}) = (split(/\s+/, $head, 4))[2, 3];
$self->{IS_DAHDI_SYNC_MASTER} =
($self->{DESCRIPTION} =~ /\(MASTER\)/) ? 1 : 0;
--
1.7.6.2
Fortunately, it's not very big and only concerns a single module so you can just patch it manually if you wish. At, or around line 230 in /usr/share/perl5/Dahdi/Span.pm you will find the following code
last;
}
}
($self->{NAME}, $self->{DESCRIPTION}) = (split(/\s+/, $head, 4))[2, 3];
$self->{IS_DAHDI_SYNC_MASTER} =
($self->{DESCRIPTION} =~ /\(MASTER\)/) ? 1 : 0;
Change it to this (comments optional).
last;
}
}
#
# Digium Patch
#
if (($self->is_soft_term_type == 0) and ($self->termtype eq "UNKNOWN")) {
$self->{IS_SOFT_TERM_TYPE} = 1;
}
#
# Digium Patch End
#
($self->{NAME}, $self->{DESCRIPTION}) = (split(/\s+/, $head, 4))[2, 3];
$self->{IS_DAHDI_SYNC_MASTER} =
($self->{DESCRIPTION} =~ /\(MASTER\)/) ? 1 : 0;
Generate
Unpack and copy the /etc/dahdi samples into /etc/dahdi
gunzip /usr/share/doc/dahdi/examples/genconf_parameters.gz gunzip /usr/share/doc/dahdi/examples/system.conf.sample.gz cp /usr/share/doc/dahdi/examples/system.conf.sample /etc/dahdi/system.conf cp /usr/share/doc/dahdi/examples/genconf_parameters /etc/dahdi/
You can now start dahdi
/etc/init.d/dahdi start
Now you can run genconf
dahdi_genconf dahdi_genconf modules
At this point, you will need to examine the generated /etc/dahdi/system.conf and remove any empty lines in it. Here's ours
# Autogenerated by /usr/sbin/dahdi_genconf on Mon Feb 17 12:34:10 2014 # If you edit this file and execute /usr/sbin/dahdi_genconf again, # your manual changes will be LOST. # Dahdi Configuration File # # This file is parsed by the Dahdi Configurator, dahdi_cfg # # Global data loadzone = us defaultzone = us
