SARK V4.0.0 blfdivert

Up a level

Sometimes it is useful to have a visual indicator that a divert is in effect for a call group or DDI pathway. This is similar to the open/closed BLF in V4.0.0, but you can apply it to any pathway. It works using custom hints and a small custom app to set/unset the pathways.

We begin by defining a custom hint in sark_customer_hints.conf

;
; This file is provided as part of the SARK/SAIL Asterisk workbench rpm
; It is not a generated file so you may freely change it. It will not be  
; overwritten if/when you upgrade SARK/SAIL 
;

exten => **900,hint,Custom:divert

This hint will monitor the state of a custom device **900. It can be any unique string you like.

Next, we will create a custom app to change the state of the device and also to route calls according to the current state. Create a custom app (call it whatever you like) and give it a span of "internal". Copy this code into it

exten => s,1,Set(state=${DB(STAT/DIVSTAT)})
exten =>  s,n,GoToIf($["${state}" = "AUTO"]?normal:divert)

exten => s,n(normal),GoTo(internal-presets,1002,1)

exten => s,n(divert),GoTo(internal-presets,1003,1)



exten => **900,1,Set(state=${DB(STAT/DIVSTAT)})
exten => **900,n,GoToIf($["${state}" = "AUTO"]?closeup:openup)

exten => **900,n(closeup),Set(DB(STAT/DIVSTAT)=DIVERT)
exten => **900,n,Set(DEVICE_STATE(Custom:divert)=BUSY)
exten => **900,n,Playback(activated)
exten => **900,n,Hangup

exten => **900,n(openup),Set(DB(STAT/DIVSTAT)=AUTO)
exten => **900,n,Set(DEVICE_STATE(Custom:divert)=NOT_INUSE)
exten => **900,n,Playback(de-activated)
exten => **900,n,Hangup

The app is made up of two parts; a router, which routes the call based upon the state of the custom device (the "s" extensions) and a flip/flop, which changes the state of the device. In our example, calls will be routed to one of two call groups (called 1002 and 1003) depending upon the current device state. In the example, 1002 just rings a bunch of phones, but 1003 will send the call off-site to an external handling service. You could of course, change this to route to whatever you like,; an IVR, a queue, etc.

The flip/flop simply sets the state of the custom device each time it is called (using **900 in our case).

Now simply set one or more BLF keys on your phones to a BLF value of **900 and you're done.

N.B. - some may ask why we tie am asterisk database value to the custom device and this is so that diverts will survive a system restart. If we did not do this then a system restart would set the divert back to its idle state, which may not be what you intended, although the code would be somewhat simplet without it as shown here

exten =>  s,1,GoToIf($["${DEVICE_STATE(Custom:divert)}" = "NOT_INUSE"]?normal:divert)

exten => s,n(normal),GoTo(internal-presets,1002,1)

exten => s,n(divert),GoTo(internal-presets,1003,1)

exten => **900,1,GoToIf($["${DEVICE_STATE(Custom:divert)}" = "NOT_INUSE"]?closeup:openup)

exten => **900,n(closeup),Set(DEVICE_STATE(Custom:divert)=BUSY)
exten => **900,n,Playback(activated)
exten => **900,n,Hangup

exten => **900,n(openup),Set(DEVICE_STATE(Custom:divert)=NOT_INUSE)
exten => **900,n,Playback(de-activated)
exten => **900,n,Hangup