SARK column names and help text

Below are listed the column, or field names, that SARK/SAIL uses together with the associated help text...

MessageKey	Message Text	Message Help Text
abstimeout	Call Timeout (seconds)	Use this value to set an absolute time limit for outbound calls. The default is 3600 seconds (1 hour) and the maximum permitted value is 99999 seconds (about 28 hours). After the timer expires, the call will be put on-hook by the system.
action	Action	Firewall Action - usually ACCEPT but see the shorewall documentation for other options
active	Active?	Activate or de-activate this object
agent	Agent	Agent number (allocated by SARK)
agentact	State	Agent State (active/inactive)
agentext	Extension	Agent extension (if logged in)
agentname	Name	Agent Name
agentpasswd	Password	The agents login password. It should be 4 digits.
agentqueuename	Queue	Call Queue that this agent will receive calls from.
agentstart	Agent Start	Agent number from which SARK will begin allocating agents.
alert	Diagnostic Alerts	Set to none,email,sms or both
alertinfo	Alert-info string	Use this field to specify distinctive ring data for the sip header. This is phone specific so you will need to read up on your phone type.
allowhashxfer	Allow hash transfer	Set this to enabled if you want SARK to recognise a hash (pound) key press as a transfer request. Unless you are supporting POTS phones, it is recommended you leave this flag disabled.
alternate	Alternate Route to remote Host	Specify an alternative if this route is unavailable. This is for desktop-to-desktop links using short dials. If the short dial link fails, you can specify a full-dial alternate. (e.g. IAX link to 5525 is down so dial 441924405525 over PSTN).
appspan	Span	The Span of your custom app... Your app can be included into the inbound call path, the outbound call path, both inbound and outbound or neither. SARK will automatically generate the correct includes for you based upon the setting you choose here.
astdlim	Asterisk delimiter	). If you are running Asterisk 1.6 then choose the comma(,).
astfiledate	create date	Date the file was created
astfilename	Filename	The filename
attemptrestart	Attempt Asterisk restart after failure?	If set to YES, the SARK diagnostic routine will attempt a restart of Asterisk if it detects a failure. The parameter has no effect in HA systems. Default=NO.
auth	Auth	Does this route require the user to enter a pin number in order to use it.
authnum	Authorized Number	Telephone number you wish to authorize for callback.
backchan	Back Channel	Channel to use for the Call back.
beginclosed	Beginning of Closed Period	Select the start time of your closed segment.
blindbusy	Bounce busy destination	Alternative destination if a bounce returns to a busy sender.
bouncealert	Alert-Info for Blind Xfer Bounce	Use this field to specify distinctive ring data for the sip header. This is phone specific so you will need to read up on your phone type.
callerid	Caller ID	Caller ID. You may be able to change this depending upon the sending device and the carrier rules.
calleridname	Caller Name	This is what the phone will send in the callerid (name) variable. It is usually set to the user name or to some department function. Do not put spaces in this field because some phones do not handle spaces well.
callgroup	Number	Name (extension number) of this call group
callprogress	Call Progress?	Force an early ringback tone.
callrecord1	Call Recording System Default	Set the global recording preferences you want. This can be overriden at the individual call group or extension.
callstate	State	Shows the device state at the time the screen was rendered
camponqonoff	Campon mini-queue ON/OFF	Turn the camp-on feature ON and OFF
camponqopt	Campon mini-queue options	Camp-on uses standard asterisk queues. You can set the queue parameters as you wish using this field.
carrier	Carrier	This is either the SIP or IAX carrier name or the technology type (e.g. mISDN or Dahdi).
carriertype	Type	Denotes the class of trunk (e.g. VOIP, PSTN etc.)
cdialstring	Custom Dial String	Use only for custom devices
cdr	Log CDR to MySQL	Set to yes if you want Sark/SAIL to log cdrs to MySQL (as well as the normal cdr-csv file). This will allow you to use the Areski Stats package to analyze your CDR records.
cfbs	CFBS	Call forward on busy or no answer
cfbscl	CFBSCL	Call forward on busy or no answer when closed
cfbsop	CFBSOP	Call forward on busy or no answer when open
cfim	CFIM	Call Forward Immediate
cfimcl	CFIMCL	Call Forward Immediate when closed
cfimop	CFIMOP	Call Forward Immediate when open
cgroup	Callgroup
classmask	Class Dial Plan	Enter the Class Dial Plan in standard Asterisk dial plan format. For example if you want a class that will handle all 5 digit and longer inbound numbers then you might enter _XXXX. Similarly, for a CLID class handler; if you wanted to create a class to handle all calls from UK mobiles (which always have numbers beginning 07) you might enter _07X.
clidstart	Caller ID	Caller ID of the calling telephone.
closeroute	Closed	The CLOSED\" inbound route. Route which will be used by the inbound route manager to process calls from this trunk when the system is \"Closed\" (i.e. in night mode).\"
cluster	Tenant	This is the name of the Tenant which this object belongs to. If you specified no Tenant then SARK will use the default Tenant. Tenants are used to provide multi-tenant support within SARK.
clusterstart	Tenant support ON/OFF	Turn ON/OFF multi tenant support
compression	CODEC	[FIDELITY,THRUPUT,g729] Sark/SAIL will attempt to minimise CODEC transcoding using this value. If you choose Fidelity it will enforce g711(law) coding where it can. If you choose Thruput\" it will use g729 if it is available
conftype	Conference Type	Choose from assisted or unassisted conferences.
context	Context Name	The name of the context you want your custom app to run in. This must be system-wide unique.
copy	Copy	Copy from an existing Device entry
cosclosed	Default Closed	Defines whether this COS will be ON by default for closed hours when new extensions are created.
cosdialplan	Dialplan	The dialplan pattern for this class-of-service. COS dialplans follow standard Asterisk dialplan conventions.
cosname	COS Name	System-wide unique name for this class-of-service rule.
cosopen	Default Open	Defines whether this COS will be ON by default for open hours when new extensions are created.
cosstart	Class Of Service ON/OFF	Whether we will run COS or not. SARK Class of Service is very powerful but if you dont intend to use it then you can save a little cpu by turning it off.
country	Your Country Identifier	Enter your country of operation.
countrycode	Country Code	Set to the correct code for your country. This will control the tones which Asterisk generates for busy, ringback, congestion etc.
datemonth	Date	Day date when this segment is active (asterisk * means any date).
defaultclosed	Defaultclosed	Set this to YES if you want all new extensions to be created with this closed restriction
defaultopen	Defaultopen	Set this to YES if you want all new extensions to be created with this open restriction
desc	Display name	The username which SARK will set in either sip.conf or iax.conf for this end-point.
description	Description	Freeform description string
device	Device	This is the device type from SARKs IP Device database. It is used to provide the provisioning template.
devicerec	RecOpts	Recording options for this object.
dhcp	DHCP_LAN	Default YES; set this to NO if you want to set your own IP address
dialplan	Dialplan	Route dialplan. The dialplan consists of the set of numbers and number patterns that this route will be sensitive to. (e.g. _0XXX. 100 _XXXXX) Arguments are separated by whitespace.
didend	DiD End	End DiD (DDI) for this group (its perfectly fine to allocate only a single number).
didstart	DiD Start	Beginning DiD (DDI) for this group (its perfectly fine to allocate only a single number).
disapass	DISA Password	4 digit DISA password. Set this ONLY if you intend this trunk to be dedicated to DISA.
displayname	Legend	String which will appear alongside the target object (or inside a widget) whenever it is displayed by SARK.
dns	DNS_LAN	Set this to a valid value for your network
dvrvmail	Deliver Vmail to	Number of the voice mailbox you wish to have voicemail delivered to.
edomain	External IP Address	This field should usually only be filled out if you are running server-only behind a NATed firewall. It forces Asterisk to include the correct return IP address in outbound packets. Without it, Asterisk will use the local server IP address and effectively spoof\" itself.\"
emailalert	Email Alert Addresses	Administrator email address
emergency	EMERGENCY	Use this field to set your Emergency number (e.g. 911, 999, 112). This is used by Class of Service and becomes part of the always-available\" set of dialable numbers.\"
endclosed	End of Closed Period	Select the end time of your closed segment.
ext	Extension	Extension Number
extalert	Alert-info string	Alert-info alters the SIP header sent to the device. It is usually used to send a request to play a distinctive ring-tone. The actual contect of the header varies from device to device.
externalip	Registration URI for remote phones	Only applies to remote phones that you wish to provision from the SARK http provisioning server. This will be the remote (i.e. SARK) URI.
extlen	Extension Length	SARK can have extension numbers of 3 or 4 digits. However, you can only change the length when there are no extensions defined to the system (i.e. at system inception).
fax	Autosense FAX Extension	Endpoint to send Autosensed faxes to.
faxdetect	FAX Detect Delay	How long to delay an inbound analogue call on a shared voice/fax line while we wait for Asterisk to decide if it has a fax or not.
faxonoff	Fax detect
filesize	Size	Filesize
filetype	type	File type
foppass	4-digit Password for FOP Ops	Self explanatory
fwdest	Dest	Packet Destination - usually $FW (meaning inbound through the firewall)
fwdestports	DEST Ports	Destination ports - a comma separated list of the port(s) you want to open; e.g. 5060,4569. For a port-range use a colon; 10000:20000
fwproto	PROTO	Protocol(tcp,udp)
fwsource	Source	Packet Source - usually either; net if you want to open a port completely (not recommended) or net:ipaddr(/cidr) if you want to open an ip or an ip range
gatewayip	GATEWAY_LAN	Set this to a valid value for your network
greeting	Greeting Number	Greeting number that this IVR uses.
greetingnum	Number	The 4-digit greeting number
groupstring	Target Numbers	The extensions in this callgroup. It can consist of extensions, call groups or external numbers separated by whitespace, e.g. 553 554 924018076
grouptype	Type	The group type; ring, hunt etc...
haautofailback	HA Auto-Failback	Turn auto failback on/off in the HA environment.
haclusterip	HA IP Address	The HA virtual IP address
haprinode	HA Primary Node (uname -n)	HA primary node name (given by uname -r)
hasecnode	HA Failover Node (uname -n)	HA secondary node name (given by uname -r)
hasynch	HA Synch Mode	HA synch mode lazy or loose. Loose means no synch.
hausecluster	Provision with Cluster IP?	Generate provisioning files using the Cluster virtual IP rather than the node ip.
header	Asterisk Filename	Name of the Asterisk control file for this header
headlocation	L/R	Local or remote. Denotes whether the phone will run inside or outside the local firewall. If it is outside then SARK will use symmetrical RTP.
host	URI/IP address	Enter the URI or the IP address of the target host.
includetenants	Tenants to Include	This is a list of tenants (separated by whitespace) that extensions within this tenant will be allowed to dial using their regular three, or four digit extension numbers. By default, tenants can not dial one anothers phones in this way.
inprefix	Add CLI Prefix	Allows you to add a CLI prefix. This is because many carriers do not send the NDD character (usually zero). This allows you to add it back.
internal_fieldname	Name	The internal name which SARK uses to track this object
intringdelay	Default Ring Time(seconds)	How long we will ring an internal phone before taking some outcome (usually voicemail).
ipaddr	IP Address	The IP Address of the end-point.
ivrname	IVR Name	IVR keyfield
key1	\"	Caller presses 1
keytime	Timeout Action	What happens if caller presses no key
latency	Latency	The latency of the end-point (i.e. the time taken for Asterisk to receive a response to an IP request).
lclvoipmax	Max LOCAL VOIP Calls	Maximum local VoIP calls we will allow (this does not include extension to extension calls) but does include Sibling calls over locally connected PBXs).
line	Line	Usually the Subscriber number the carrier has allocated to you. However it may also be a DiD(or DDI) number and sometimes the account name or number (in the case of some VOIP trunks).
localIP	Local IP	Local subnet IP address
localhost	Local Host Name	This is the local hostname - i.e somehost
location	Local/Remote	Local or remote. Denotes whether the phone will run inside or outside the local firewall. If it is outside then SARK will use symmetrical RTP.
logopts	Logging Options	Logging options native usbstick ramdisk. This should be left to deafult unless you are running a diskless PBX. setting this value incorrectly can lead to serious data loss
lterm	Late Termination	If you set this value to YES, SARK will attempt to terminate inbound calls as late as it can in the switching process (i.e. when the target extension goes off hook). This is not always possible, or desireable and it can sometimes cause loss of ringback tone during complex switching operations such as internal/external call forking.
macaddr	MAC address	The MAC address of the end-point. The MAC address is used by SARKs autoprovisioning routines.
match	Line Pre-select	2 digit pre-select code (must be systemwide unique)
misdnrun	mISDN Driver	Enable or disable the mISDN drivers from being loaded at system start-up.
moh	MOH instead of Ringtone	Play Music-on-Hold rather than the more usual ringback tone to the caller.
monitor	Monitor this resource	Set this to YES if you want the diagnostic routines to watch this resource.
month	Month	Month Date when this segment is active (asterisk * means any month).
mtime	Multitimer	Enable or disable the MTIME server. The MTIME server can save significant CPU if you have defined multiple timers in the automation panel on your system.
netmask	NETMASK_LAN	Set this to the correct value for your subnet
new	New	Button Text
nrdigits	Auto create alias digits	Used to set the number of auto-create digits for number aliasing. This feature was useful before SARK supported both 3 and 4 digit extensions.
obeydnd	Obey DND?	If set to YES dont ring phones that are in DND
openfirewall	Create Firewall Rule?	If you specify YES then SARK will cretae a firewall rule for this url
openroute	Open	The OPEN\" inbound route. Route which will be used by the inbound route manager to process calls from this trunk when the system is \"Open\".\"
operator	System Operator(default 0)	The system operator. The key press you wish to use to contact the operator (default is zero).
orideclosed	Override	Set this to YES if you want to force ALL extensions to have closed restriction
orideopen	Override	Set this to YES if you want to force ALL extensions to have this open restriction
outcome	Outcome	Where the call will be delivered if the call group fails to terminate the call.
password	Password	The password for this IP Carrier account, called the secret\" in Asterisk sip.conf amd iax.conf.\"
path1	Path 1	You can specify up to 4 paths (1 primary and up to 3 failover) in descending order of priority.
path2	Path 2	You can specify up to 4 paths (1 primary and up to 3 failover) in descending order of priority.
path3	Path 3	You can specify up to 4 paths (1 primary and up to 3 failover) in descending order of priority.
path4	Path 4	You can specify up to 4 paths (1 primary and up to 3 failover) in descending order of priority.
peername	Asterisk peer	This is the Asterisk sip.conf or iax.conf [peer] label which appears in square brackets above the peer cadenza. By default, SARK allocates a unique name to each peer but you can override it if you wish.
pgroup	Pickup Group
playbeep	Play tone on Failover	If set to YES a beep tone will be played whenever the system fails over a trunk call to a secondary provider. If set to NO, no tone will be played.
playbusy	Play tone on Busy	If set to YES the PBX will come off-hook and play a busy tone, if set to NO the PBX will stay on-hook and play a busy message, if set to SIGNAL a BUSY signal will be sent to the ua.
playcongested	Play tone on Congested	If set to YES the PBX will come off-hook and play a congestion tone, if set to NO the PBX will stay on-hook and play a congestion message, if set to SIGNAL a CONGESTION signal will be sent to the ua.
playsound	Play
port	Port	The port which this end-point is using to receive SIP packets.
postdial	Dial String Lead-out	Used to construct the trailing part of the dial for this technology.
predial	Dial String Lead-in	Used to construct the beginning part of the dial for this technology. For example, to use misdn TE p2p group dial you might specify mISDN/g:TEPP (see the mISDN setup guides at http://www.misdn.org).
prefix	Dial Prefix	Use this if you need to have SARK dial a line-seize digit or some other pre-dial string during call back to an authorized number.
preselect	Seize	Two digit Seize\" code. By prepending your call with the seize code you can override the normal call-routing and force a call to use this channel.\"
privileged	Priv	Denotes whether this trunk is running in privileged mode or unprivileged mode. You can generally leave this to default unless you are consolidating T1/E1 circuits or handshaking with legacy equipment.
provisioning	Provisioning	Header
proxy	Dynamic Proxy Enable	Enables/disables SARKs dynamic proxy feature (see extensions panel status field).
proxyignore	Proxy Ignore List	Some applications can be disrupted by the Dynamic Proxy processor. By placing their relative urls in this list, they will be specifically bypassed by the proxy processor.
queueactagents	Active Agents	Number of active agents
queuename	Queue	System wide unique queue name
queueoptions	Options	Asterisk Queue options
recqdither	Queue Search Dither	How far SARK will tolerate a time slip on a potential queuelog match. Expressed in seconds.
recqitdelay	Recording Daemon sleep time	Daemon sleep time in seconds
recqsearchlim	Queue search limit	How far SARK will read backwards up the queuelog looking to match a queue entry with an extension.
register	Registration String	Used to provide a registration string if your carrier requires it
remotenum	DiD Number	The subscriber number which will be presented to us by this trunk (technically, the Dialled Number ID, or DNID).
rev	Version	SAIL rpm Version number
ringdelay	Ring Time (seconds)	The number of seconds that we will ring the end-point before taking an outcome.
route	Route	Route name - must be system-wide unique.
routedesc	Description	Free form description
rule	Extension Number	Extension Number. This is the system internal extension number. It can be 3 or 4 digits in length and it is set in globals(EXTLEN). SARK will set this value to the first unused extension number it can find, however you can override this if you wish.
runfop	Flash Operator Panel	Enables/disables the FOP server. The FOP server is quite heavy on resource and it can cause big CPU spikes on a small system. Disable it to save CPU.
s-peername	Sibling or Trunk name	For Siblings enter the linux hostname of the Sibling machine. For SIP-to-SIP type links enter the SIP peername.
sarkPCImsg1	Error occurred during DAHDI generation.	Message
searchpath	DNS Search Path	The serach path is optional. If you wish to use it then set it to the correct value for your network (see man resolv.conf)
sipiaxpeer	Sip Peer entry
sipiaxstart	Extension Start Number	Extension number from which SARK will begin allocating extensions. Set extension length (EXTLEN in Globals) before you set this value.
sipiaxuser	SIP user entry
sipiaxusername	Asterisk User	This is the Asterisk sip.conf or iax.conf type=user label which appears in square brackets above the user cadenza
sipmulticast	PnP Provisioning?	Enable this to provide multicast support for provisioning. This is used by phones from manufacturers such as Snom, Yealink and GIgaset
skin	Skin	Sets the CSS for from the ones available in the drop down.
smartlink	Smartlink	If set to yes, then SARK will attempt to match the last digits of the DiD with an extension number. If it finds a match it will automatically create a routing for the DiD to the extension.
smsalert	SMS Alert Numbers	One or more numbers which will receive sms alerts in the event of a diagnostic alert.
smsc	SMSC Pathway	Pathway to your carriers SMS hub (if they have one). This is specified as a formal asterisk channel name. As an example, the BT sms hub might be specified as follows...
Dahdi/2/17094009
source	Source	Source of the tooltip help (either Core (from the SARK tt DB) or User (from the user tt DB).
spypass	4-digit Password for Agent Spy	Password used to validate spy requests.
strunk	Analogue inbound trunk	Used to route inbound analogue calls
subnet1	allow subnet (CIDR)	A subnet in CIDR format from which you want to accept packets for this trunk
subnet2	allow subnet (CIDR)	A subnet in CIDR format from which you want to accept packets for this trunk
supemail	Supervisor Email	Supervisor email address
swoclip	Switch on CLIP
sysop	Operator Real Extension	The operator endpoint. This is used by SARK as the endpoint of last resort so it is important that you point this at a real endpoint.
syspass	4-digit Password for KEY Ops	Password used for privileged key operations (such as recording a greeting or putting the system into night mode).
tag	Alpha Tag	Alpha tagging allows you to send a short character string to the phone. Most phones will display this tag\" when they receive it.\"
technology	Technology	The Asterisk technology\" type (e.g. SIP
tenantname	Tenant	The name of the Tenant. It should be system-wide unique.
tenantoperator	Operator	The extension which will serve as the operator for this Tenant.
tftp	TFTP Server	Enable or disable the tftp server. This can save memory in a small system if you are not using provisioning
timespan	Time Span	Time when this segment is active (asterisk * means any time).
transform	Transformation mask	Used to transform numbers using value comparisons and proceeding left to right... xx:xx xx:xx. Nulls in the left operand result in addition. Nulls in the right operand result in suppression.
trunkname	Name	This is a name you can give to the trunk to help identify it.
username	Username	The username for this IP Carrier account
version	Version	THis is the SAIL version number. You may need this when dealing with Tech Support.
vmailfwd	User to receive email notifications	Set this to the email address of the user if you want Asterisk to send voicemails as encapsulated attachments in an e-mail. This is often called unified messaging.
voiceinstr	Voicemail Instructions	Setting this value to YES will cause voicemail to play the long instruction message. Setting it to NO plays the short version.
voipmax	Max Outbound VOIP calls	Maximum number of concurrent VOIP outbound calls the system will allow before failing over to other pathways. This number should be set well below the bandwidth threshold of your Internet circuit.
vringdelay	Induced VoIP Ring Delay	Allows you place an artificial ring-back tone delay onto a VOIP circuit. Voip circuits do not naturally ring\". This feature will generate a ring-back tone for the number of seconds specified. Usually
weekday	Day	Day of the week when this segment is active (asterisk * means any day).
xmpp	XMPP	Enable/Disable XMPP
xmppserv	XMPP server	XMPP server URI
ztp	Zero Touch Provisioning	Enable this to provide Zero Touch Provisioning. You must also have PnP Provisioning enabled with this option