SARK V4.0.0 Wakeup
Contents
Introduction
SARK Wakeup call is primarily intended for hotel applications but it can be used anywhere a wakeup call is required.
usage
Schedule a wakeup
To schedule the wakeup call touch *24*; the auto-attendant will ask you to enter a 4 digit call time. This can be in 12 hour or 24 hour format. For instance, to schedule a wakeup call for 7:30PM you can enter either 1930 or 0730. If you enter 0730, the attendant will ask if it is AM or PM.
Cancel a wakeup call
Once you've scheduled a call, you can cancel it by touching *24*. The attendant will ask if you wish to schedule a second wakeup call or cancel an existing one. It will then lead you through each call you have scheduled and give you the opportunity to cancel it.
Snooze
When your wakeup call is made; the auto-attendant will give you the option of a 10 minute "snooze". Do this by touching 1 on the telephone keypad. Otherwise just hang up to complete the call.
Schedule a wakeup call as an administrator
Touch *24*+extn (e.g. to schedule a wakeup for extension 345; touch *24*345). The auto-attendant will request the system password (SYSPASS in globals panel). Once you have entered the password correctly, the call will proceed as above.
Cancel a wakeup call as an administrator
Touch *24*+extn(e.g. to cancel a wakeup for extension 345; touch *24*345). The auto-attendant will request the system password (SYSPASS in globals panel). Once you have entered the password correctly, the call will proceed as above.
